IT-007-IP5-1L-1L IPower Inline IP Monitor unit 3Phase 32Amp input - 32Amp Output (BTO)
Description:
IT-007-IP5-1L-1L 3PH Inline Monitor
32 Amp 3 Phase Inline Monitor.
32Amp input 32Amp output
This unit has a built in web server and full remote monitoring over SNMP. With a wide range of input and outlet options, up to a maximum of 32 Devices can be monitored and will work on circuits up to 32A. Power monitoring is carried out using a calibrated resistor for the most accurate reading up to 1% or better.
Power Monitoring is provided by using a calibrated resistor giving accuracy greater than 1%. Intelligent Power has an easy-to-use HTML interface with the ability to set SMS and Email alarms for all critical parameters. Can be configured as a Primary device, with the ability to control an additional 31 Secondary devices, from a single IP address. Intelligent Power units will work in conjunction with other units to create a fully flexible monitoring system allowing for individual racks to have measurement only, or measurement and switching capabilities PDU Agent ™ Management Software Collate and produce reports on all your readings. PDU Agent is an entry level management platform with easy to use dashboard layout that lets you log measurements and events from multiple units, for historical evaluation and to collate and produce accurate billing information
Features:
Connected into each single phase PDU.
Up to 32 units can be daisy chained over a single IP address
PDU Agent can support up to 50 x IP addresses
Lead lengths can be changed as required
Benefits:
- Can buy as little as one unit at a time as required so less upfront costs.
- UK manufactured and supported.
- Free software to produce billing reports.
- 5 Year Warranty
- Easy plug in installation
Metering:
Energy metrics including:
• Volts
• Watts
• Amps
• Power factor
• kWh
• Frequency
• VA
• kVA
• Peak Volts
• Peak Amps
• Internal Temp
• Kg/Co2
• KJ/H
• BTU/H
Environmental & security
metrics including
Up to 8 Temperature sensors
• Single temp/humidity sensor
• 3 sets of dry contacts
• Cabinet door lock
• Card reader
• Door open sensor
• Remote display
• MOD BUS port
• USB port
Communications & Protocols.
HTTP
• HTTPS
• HTML
• CGI
• TELNET
• SMTP
• SYSLOG,
• RADIUS,
• SNMP v2 v3
• IP v4 v6
Specification:
Body Dimensions: 67mm Wide 65mm Deep 575mm Long
Fixing Centres: 633mm
Material: Sheet MS
Finish: Black powder coat
Fixing Method: End Brackets
Input: 1mtr 5core 6mm HO7 cable to 32A 3PH Commando
Output: 1mtr 5core 6mm HO7 Cable to 32A 3PH Commando socket
Protection:
Indicator: Front display, individual outlet power present
Earthing: M6 Earth stud to end
Rating: 32A @ 400V AC 50/60 Hz
Standards: Conforms to BS EN60950-1:2005 2nd edition +AM1 & AM2
Conforms to BS EN62368-1:2014+All:2017
UK CA: Compliant
WEEE: Compliant
RoHS: Compliant
CE: Compliant
Operating Temp: -10° to +60°C depending on protection device.
Warranty: 5 years return to base
Electrical Rating.
Please note, these calculations are based on an assumed steady voltage of 230V AC and a Power Factor of 0.9. Voltage fluctuations will affect the kVA & kW values. The only rating that is constant is Current (Amps) This PDU will handle a constant current draw up to 32A. The kVA & kW ratings and are for indication purposes only.
INPUT
Type - 3 Phase
RMS Volts- 400V
RMS Amps - 32A
OUTPUT
Type -Phase
RMS Volts - 230V
RMS Amps - 32A
PF - 0.9
PDU TOTAL
kVA - 38.4
kW - 34.56