Product filter

Use Area
- Data Centre/Rackmount Desk mount/Desk port Basic/Office
Number of Output Ports
- with any of these... 1 port 2+ ports 4+ ports 6+ ports 8+ ports 10+ ports 12+ ports 14+ ports 16+ ports 18+ ports 20+ ports 24+ ports 32+ ports 36+ ports 42+ ports 48+ ports
Socket Types
- with any of these sockets... UK 3pin C13 C19 C13 + C19 C13 + UK 3pin C13 + C19 + UK 3pin Other
Supply Input Type
- 13A UK 3pin 16A IND309 32A IND309 10A C14 16A C20
Function
- Simple Power outlets only Simple With Ammeter With IP Switching Control With IP Monitoring With IP Monitoring & IP Switching With IP Port Monitoring & Switching
Special Features
- Locking sockets ATS / STS (Dual Supply Switching)
Supply Power Phase
- Single Phase 3 Phase

UPDS-VRIMS UPTIME DEVICES 2 Port Intelligent Power Strip. Environmental Monitoring Sensor

Description:

UptimeDevices Sensor Power VRIMS
2 Port Power RIMS Remote Intelligent Multi Sensors (™ Pending)

In today’s environment one needs to manage power and energy consumption, this is an area where money can besaved. Data center managers need solutions that monitor, track, and manageIT equipment. The Two PortPower RIMS allow for monitoring of network power management with alerting capabilities of: - Current Load (A) - Voltage (V) Each IEC port is independent and can run 120-250V regardless of what voltage the other port is running. The Two Port Power RIMS can be programmed to automatically turn on/off/reboot during an alarm condition. For example, if temperature is too high, the Two Port Power RIMS can automatically turn off a server before it overheats. Each RIMS is a Daisy Chain Sensor™, so multiple RIMS can be plugged into any RPM Console Manager (CM) sensor port. RIMS can be up to 1000 ft. away from the RPM CM with no external power needed. Because each RIMS can store its own readings, there is no data logging delays. Each RIMS has a battery backed clock so you can be assured each data point is properly recorded. RIMS generate events when internally monitored thresholds are broken. The events are communicated by the RPM CM via e-mail, SNMP trap, or SMS modem. The RPM CM stores alarm logs and graphs the RIMS stored data.

Features:

• Power on/off/reboot 120V-250V x 2 power outlets
• Monitor current draw on each outlet
• 2 IEC Connections
• Change in RIMS power does not change outlet state
• Each outlet is independent
• Each outlet can change state on other sensor events
• Temperature sensor included

Specification:

UptimeDevices Sensor Typical setup
2 Port Power RIMS Remote Intelligent Multi Sensors (™ Pending)

• Daisy Chain Sensors™ (RIMS) can be plugged into any RPM Console Manager (CM) sensor port

**Please note this unit " Sensor " has to be used with the Uptime Devices - RPM ( Remote Physical Monitor ) Unit. see compatible products link.

PDU Switch Specialists & Accessories from Adder, Raritan, Avocent, Rittal & Rose, UK based