AVM-C110-CAM-DP - AdderView Matrix C110 Computer access module - DisplayPort FOR (ADDERView MATRIX C1000 SYSTEM)

Description:

ADDERView® Matrix C110 (DisplayPort)
An ADDERView Matrix C100 Series ZeroU™ IP KVM dongle for extension and matrix of video, audio and USB over a single cable.

The ADDERView Matrix C110 DP is a ZeroU™ Computer Access Module (CAM) with a DisplayPort connecter to enable computer systems to be attached to an ADDERView Matrix KVM system.

Features:

ZeroU™ Form Factor
ZeroU™ Form Factor
The ADDERView Matrix C100 Series takes ZeroU of rack space in the server room allowing for ultimate flexibility and ease of installation.

USB Powered
USB Powered
Using less than 3 Watts, the device can be powered from USB. This means there is no need for an external PSU. Options for powering from an external PSU or redundant PSU are also available.

USB 2.0 with Class Control
USB 2.0 with Class Control
Supports USB devices including graphics tablets, jog shuttles, joysticks, card readers and 3D explorers, alongside mass storage devices. The system can disable types of devices.

Perfect Digital Video in Real-Time
Perfect Digital Video in Real-Time
Using a spatially-lossless encoding system, with 1:1 pixel mapping, the device provides pixel-perfect and color accurate video with no artifacts.

Support for Dithered Video
Support for Dithered Video
Allows dithered analog or noisy video to pass through the system. Some Mac computers use this technique.

EDID Management
EDID Management
Intelligent EDID management allows either the true characteristics of the monitor to be passed back to the computer or a fixed one.

Digital Audio
Digital Audio
The system can deliver USB stereo audio (bi-directional) or embedded video standard stereo audio (uni- directional).

Plug and Play
Plug and Play
ADDERView Matrix devices are delivered in a zero config state so you can plug them in and start working on them straight away. There is no need for drivers or software to be installed.

Specification:

General all parts system setup example (ADDERView MATRIX C1000 SYSTEM)
DisplayPort PMFL1024

AdderView Matrix C110 Computer access module - FOR ADDERVIEW MATRIX SYSTEM C1100

Video Information (For 1 Screen)
Maximum Resolution 2560 x 1600
Frame Rate 60
Colour Depth 8 bpc

Computer Connections
USB A 2× 2.0 True Emulation, Full Speed, Low Speed, High Speed
Full Size DisplayPort 1× 1.1 (dual mode)

Link Ports
8p8c (RJ45) 1×

Audio Connections
Audio Type Digital
Channels 2
Audio In Ports 1× USB
Audio Direction Bi-directional
Size (bit) 16
Speed (kHz) 48
Additional Information Digital Audio 2 channel linear PCM

Cable Requirements
Recommended Cable Type CAT5e and above
Maximum Cable Length 100m / 328.1ft

Power Source
USB powered 2×
5V 1×
Power Additional Information USB power: 2x USB2.0 (2x 500mA @5V) 5W• External power: 5VDC, 1A, (LPS)

Network Support
Bandwidth 1GbE
10/100 Support No