PE5342TG - Aten '42-Outlet 32A' eco PDU - 36 x C13 & 6 X C19 in 2 x Banks 309 1Ph
(Intel upgradable by EC1000)
Description:
ATEN PDU - (PE5342TG)
42-Outlet eco PDU (Thin Form Factor eco PDU)
• 0U 42-Outlet thin form factor eco PDU
• Bank level metering
The ATEN NRGence™ PE5342TG eco PDU is thin form factor intelligent PDU that contain 42 IEC outlets. The lightweight thin form factor PDUs' 5.6 cm width fits tight into server racks, providing more space in the rack to increase air flow and cooling efficiency. This also means faster maintenance thanks to easier access to equipment installed behind PDUs.
NRGence™eco PDUs offers real-time power measurement–allowing you tomonitor the power status of devices attached to the PDUs, at the PDU and Bank level, from practically any location via a TCP/IP connection.
With the combination of ATEN eco PDUs and eco Sensors, an administrator’s data center is equipped with real time monitoring, measurements and analysis that can produce reports of power usage, PUE, RCI and RTI to meet the ISO 50001 requirements. With these critical indexes, you can generate customized reports about your data center that include energy saving suggestions. Following these suggestions allows you to optimize energy usage to save energy without harming your IT equipment’s reliability. eco Sensors provides you with an easy method for managing multiple devices, offering an intuitive and user-friendly Graphical User Interface that allows you to configure a PDU device and monitor power status of the equipment connected to it.
* ATEN EC1000 Energy Box and energy management software – eco Sensors are available at www.aten.com.
Features:
- Thin form factor design with 56 mm width
- Built-in 10/100 Mbps Ethernet port
- Supports TCP/IP, UDP, HTTP, HTTPS, SSL, DHCP, SMTP, NTP, DNS, Auto Sense, Ping, SNMP,
- 2-level account and password security, IP/MAC filters, SSL 128-bit data encryption, RADIUS
- Supports eco Sensors software and browser access via IE, Firefox, Chrome, Safari and more
- Bank level power metering and monitoring
- Environment monitoring via external sensors for rack temperature and humidity readings and alerts
- Real-time aggregate current, voltage and power and power dissipation displayed in a browser-based
- Space saving 0U rack mount design with rear mounting
- Lok-U-Plug & EZ-Lok – easily secures power cable to PDU
- Eco Sensors Energy
- Management Software *
- Automatic discovery of all PE devices within the same intranet
- Remote real-time power measurement and monitoring
- Real-time environment sensor monitoring
- Plotting/monitoring of all PE devices
- Exceed threshold alert through SMTP and System log
- Power analysis report
* Eco Sensors is designed to work with NRGence™ eco PDUs, and is bundled with all PE package
Specification:
SETUP pmkd0524
PE5342TG
42-Outlet eco PDU (Thin Form Factor eco PDU)
• 0U 42-Outlet thin form factor eco PDU
• Bank level metering
ELECTRICAL
Nominal Input Voltage 100 – 240 VAC
Maximum Input Current 32A (Max)
Input Frequency 50-60 Hz
Input Connection IEC 60309 32A
Input Power 7360 VA(Max)
Outlet Type Total : 36 x IEC320 C13 + 6 x IEC320 C19
Bank1 : Outlet 1 – 21 ; 18 x C13 + 3 x C19
Bank2 : Outlet 22 – 42 ; 18 x C13 + 3 x C19
Nominal Output Voltage 100 – 240 VAC
Maximum Output Current (Outlet) C13: 10A (Max)
C19: 16A (Max)
Maximum Output Current (Bank) 16A (Max)
Maximum Output Current (Total) 32A (Max)
Breakers 2 x 16A Slim Breaker
Metering Bank Level Current, Voltage, VA ,
PF and kWh Monitoring
Outlet Switching None
Environment Sensor Ports 2
Metering Accuracy Voltage Range: 100VAC ~ 250VAC +/-1%
Power Range: 100W ~ Maximum Capacity +/- 2%
Current Range: 0.1A~1A +/- 0.1A,1A~20A +/-1%
PHYSICAL PROPERTIES
Dimension (H x W x D) 177.5 x 5.6 x 4.8 cm
Weight - 5.57 kg
Power Cord Length - 3 m
ENVIRONMENTAL
Temperature (Operating / Storage) 0 –40°C / -20 – 60°C
Humidity (Operating & Storage) 0 – 80% RH, Non-Condensing
COMPLIANCE
EMC Verification - FCC, CE, C-Tick, Others by Request
Safety Verification - cTUVus, PSE, Others by Request
CONTENTS
1x PE5342TG eco PDU
1x Mounting Kit
1x User Instructions
* The specification and pictures are subject to change without notice.
* All trademarks and logos are the properties of their respective holders