Smart-e 4K-RX900 100m Receiver for HDMI, Infrared and RS232 providing Inline Power to 100m - 4k 2k 1080p at 60Hz, 3D fully HDCP Compliant

Description:

The 4K-RX900 is a receiver unit that can be used to receive and convert back to a single HDMI connection to the display whilst allowing for RS232 and IR passthrough.

This receiver can be used in conjunction with 4K-TX910-WP Wall Plate Transmitter to form a transmitter and receiver pair that would be ideal in meeting rooms, conference rooms or suites where you have multiple inputs from various attendees or management who may need to share their screen with the rest of the attendants.

Alternatively, this could be installed in the home to extend any SVGA or HDMI signal from one point in the house to a large screen.

Features:

•Resolutions up to and including 720p, 1080p, Ultra HD 2K and 4K resolutions - HDMI input
•Resolutions up to and including 720p and 1080p - RGBHV (VGA)
•Supports HDMI up to 297 MHz TDMS clock
•Digitizes and scales RGBHV input to 1080p
•Embeds analogue audio when digitizing
•150m Cat6 extension—HDBT (receiver dependant)
•IR Pass-through
•Transparent RS232 pass-through
•RS232 control
•Uses easy to install single CAT5e-8 cable
•HDMI, DVI-D & DisplayPort formats
•High ground loop immunity
•1 CAT 6-8 STP/FTP cable
•Supplies remote power to wall plate
•Uses HDBaseT technology
•Button control & auto sense
•Compact receiver units

Specification:

Typical Setup Extending a Laptop and Blu-Ray Player
•HDMI, DVI & Display Port
•HDMI, Deep Colour, 3D, 4K & 2K resolutions
•3D compatible
•Distributes signals over a single 100m CAT 5-8 cable
•HDCP compliant
•Infra-red & RS232 signal passthrough
•Wide bandwidth IR transmission
•Transparent RS232 passthrough
•In-line powered receiver
•Locking DC connector
•Supports 1920x1200 @ 60 Hz