PE8108G - Aten PDU - NRGence Eco PDU intelligent IP Access switching PDU Input via 16 Amp C20 feed connector to 8 x C13 AC outlets, Outlet level monitoring
Description:
General 81/208G pmkd424
8 outlets C13
Supply Connector type Input 16A C20 Connector (derated 100-240v 10A )
Outlet Power Measurement
The PE8108G eco PDU is intelligent PDUs that contains 8x AC C13 outlets, other versions are available in various socket configurations.
Input via 16AMP Style C20 connectionLoad Capacity limited version 100-240v (UL Derated)10A. See full specification
It provides secure, centralized, intelligent, power management (power on, off, cycle) of data center IT equipment (servers, storage systems, KVM switches, network devices, serial data devices, etc.), as well as the ability to monitor the center's health environment via sensors*.
The ATEN Altusen eco PDUs offer remote power control combined with real-time power measurement - allowing you to control and monitor the power status of devices attached to the PDUs at outlet level from practically any location via a TCP/IP connection.
The eco PDU supports any 3rd party v3 SNMP Manager Software and The eco Sensors (Energy Management Software). The eco Sensors provides you with an easy method for managing multiple devices, offering an intuitive and user-friendly Graphical User Interface that allows you to configure a PDU device and monitor power status of the equipment connected to it. With the eco Sensors, the Sensor-enabled eco PDU also offers comprehensive power analysis reports which can separate by departments and locations, providing precise measurements of current, voltage, power and watt-hour in a real-time display.
With its advanced security features and ease of operation, the eco PDU is the most convenient, most reliable, and most cost effective way to remotely manage power access for multiple computer installations and allocate power resources in the most efficient way possible.
*Sensors are optional accessories. A sensor-enabled installation is required to generate a more complete energy-efficient data and chart. Higher sensor installation density is helpful to generate more accurate data.
Features:
• 8 outlets C13
• Power input via 16Amp IEC C20 (derated 100-240v 10A )Port / Requiring supply cable
• Outlet Power Measurement
Power Distribution
- Space saving 1U rack mount design with rear mounting
- IEC or NEMA outlet models
- 3 digit 7-segment front panel LED shows Current / IP Address
- Remote users can monitor outlet status via web pages on their browsers
- Safe shutdown support
- Separate power for the unit's own power and its power outlets.
- The user interface is still accessible even when an overload condition trips the devices' breaker
Remote Access
- Remote power control via TCP/IP and a built in 10/100 Ethernet port
- Network Interfaces: TCP/IP, UDP, HTTP, HTTPS, SSL, SMTP, DHCP, NTP, DNS,
- (10Base-T/100Base-TX, auto sense, Ping)
- eco PDU Power Management software – eco Sensors
- Supports SNMP Manager V3
Operation
- Local and Remote power outlet control (On, Off, Power Cycle) by individual outlets
- Power-on sequencing – users can set the power on sequence and delay time
- Easy setup and operation via a browser-based user interface
- Multibrowser support (IE, Firefox, Chrome, Safari)
- RTC support to keep the timer running during times of no power.
- Supports up to 8 user and 1 administrator accounts
Management
- Power status measurement at the PDU or Outlet level
- LED indicators for current and IP address at the PDU device level
- Real-time current, voltage, and kWH displayed in a browsed-based UI for monitoring at the PDU
- Current and voltage threshold setting
- Naming support for outlets
- User outlet access assignment on an outlet-by-outlet basis.
- Event logging and syslog support
- Upgradeable firmware
- Multilanguage support: English, German, Chinese, Japanese, French, Spanish, Italian..
Security
- Power status measurement at the PDU or Two-level password security
- Strong security features include password protection and advanced encryption – 128 bit SSL
- Remote authentication support: RADIUS
Eco Sensors Energy Management Software
- Automatic discovery of all PE devices within the same intranet
- Remote real-time power measurement and monitoring
- Remote real-time power outlet management*
- Remote real-time environment sensor monitoring
- Plotting/Monitoring of all PE devices
- Exceed threshold alert through SMTP and Syslog
- Power Analysis Report
Specification:
SETUP
CONTENTS
1x PE8108 Power Distribution Unit
1x Power Cord
1x Rack Mount Kit
1x Software CD
1x User Instructions
Monitoring level - Outlet
ELECTRICAL
Function PE8108A PE8108B PE8108G
Power Outlets Direct 8
Connectors Power
Inlets 1 x IEC 320 C20
Power
Outlets NEMA 8 x NEMA 5-15R NA
IEC NA 8 x IEC 320 C13 8 x IEC 320 C13
Sensor 2 x RJ-11
LAN 1 x RJ-45 (F)
LEDs Outlet Status 8 (Orange)
Outlet / IP 1-digit 7-segment (Orange)
PDU Current / Outlet Current / IP 3 (Green)
Current / IP 3-digit 7-segment (Orange)
Power 1 (Blue)
10/100 Mbps 1 (Orange / Green)
Link 1 (Green)
Sensor 2 (Green)
Switches Reset 1 x Semi-recessed Pushbutton
Power 1 x Non-fuse Breaker
I/P Rating 100–120V~; 50/60Hz; 12A 100–240V~; 50/60Hz; 12A 100–240V~; 50/60Hz; 10A
Load Capacity 1440W 2880W 2400W
O/P Rating Per Port 100–120V~; 50/60Hz; 12A 100-240V; 50/60Hz, 12A 100-240V; 50/60Hz, 10A
Total 100–120V~; 50/60Hz; 12A 100-240V~; 50/60Hz, 12A 100-240V~; 50/60Hz, 10A
PHYSICAL PROPERTIES
Environment Operating Temp. 0 - 50°C
Storage Temp. -20 - 60°C
Humidity 0-80% RH Non-condensing
ENVIRONMENTAL
Housing Metal
Weight 2.80 kg 2.87 kg 2.87 kg
Dimensions
( L x W x H ) 43.24 x 21.93 x 4.40 cm
COMPLIANCE
EMC Verification - FCC, CE, C-Tick, Others by Request
Safety Verification - cTUVus, PSE, Others by Request
Note: For some of rack mount products, please note that the standard physical dimensions of
WxDxH are expressed using a LxWxH format
* The specification and pictures are subject to change without notice.
* All trademarks and logos are the properties of their respective holders