X2-PDM4
X-Series Chassis mountable Power Distribution Modules with 4 output power cables & securing plate. Used for compact power splitting to 4 x X-Series adder devices when loaded in the X-Series Chassis.
AdderLink X2 Power Distribution Modules/cables & plate UK PSU
- Easy compact power splitting for X-series devices in the X-chassis
- 1 x power to 4 outputs with mini power link cables
- Note that the maximum loading on any one output must not exceed 1 Amp.
AdderLink X2 Power Distribution
Modules/cables & plate UK PSU
Used for compact power splitting to 4 x X-Series adder devices when loaded in the X-Series Chassis.
Compliance
CE (EN55022 Class A); FCC Part 15 Subpart B Class A, IC Class/Class A
Indicator
Right-side-mounted LED for power
Connectors
(1) Left-side-mounted 2.5-mm center-positive barrel jack for power input;
(4) Right-side-mounted 2.5-mm center-positive barrel jacks for power output
Maximum Altitude
10,000 ft. (3048 m)
Temperature Tolerance
32 to 104°F (0 to 40°C)
Humidity Tolerance
5 to 60% no condensing
Material
Steel and stainless steel
Power
Input to included power adapter: 100 to 240 VAC at 50 to 60 Hz from utility-power (mains) outlet, through detachable power cord and IEC 320 inlet, to external transformer
Output from Adapter
5 VDC at up to 2.5 A from transformer to power supply's 2.5-mm input barrel jack
Output from X2-PDM4
Four outputs of 5 VDC at 1 A to X2-SILVER or GOLD units
Consumption
2.5 watts maximum by the power supply plus 2.5 watts maximum by each receiver it powers
Size
1"H x 4.7"W x 3.1"D (2.5 x 12 x 7.9 cm); rear edge of endplate protrudes an additional 0.4" (1 cm); optional stick-on feet protrude an additional 0.1" (0.3 cm)
Weight
8.3 oz. (237 g)